Custom is standard for us – also for industrial and military applications.

On the new homepage „systemkabel.com" we will offer you an insight into our extended capabilities regarding customer-specific cable systems for industrial, military and optoelectronic device manufacturers.

Along with highest requirements of electrical performance there are devilish environmental and
use conditions to account for: High flex cycle count, extreme pull forces, multiple autoclaving cycles, withstand to diverse chemical substances, etc.

These are challenges we are solving already today for our customers.
More on this subject soon on: www.systemkabel.com

Valued Customer,

our company will be closed from December 24, 2009 until January 4, 2010 for Christmas Holidays. The executive board and the entire staff wish you a Merry Christmas and a Happy New Year and many thanks for the pleasant cooperation.

We thank you for your visit to MEDICA 2009. Any open questions? We are certainly available for you. Please write us: info@bernd-richter-gmbh.com

Visit us in Düsseldorf on MEDICA 2009, the World Forum for Medicine from 18th to 21nd of November 2009 in Hall 11 booth F73 (Exhibition info).

Do you have any questions? Please write us.

We have company holidays between July 20th and July 31th 2009 (both inclusive).
We will be back on August 3rd, 2009.
The entire staff wishes you sunny and recreative summer weeks.

For two days, from July 26 to 28, the otherwise so peaceful downtown of Wipperfürth will be a noisy place once more!

Given it´s success in 2008, the City Kart event is back with its 2009 edition. Company Bernd Richter will be attending again with the “Richter Team Racing”.

Beginning with the opening party, continuing with the qualification races and ending with the award ceremony, we will be there.

We have company holidays between July 20th and July 31th 2009 (both inclusive).
We will be back on August 3rd, 2009.
The entire staff wishes you sunny and recreative summer weeks.

Health is one our company goals, this does not only apply to the products we build for our customers. For this reason, the company is sponsoring the membership of all employees at the Fitness Center INJOY, a center that offers health promoting programs, health checks, nutritional advisory, back schooling and many other program points.

We wish you a happy, healthy and successful new year 2009.

Valued Customer,

our company will be closed from December 24, 2008 until January 5, 2009 for Christmas Holidays. The executive board and the entire staff wish you a Merry Christmas and a Happy New Year and many thanks for the pleasant cooperation.

We thank you for your visit to MEDICA 2008. Any open questions? We are certainly available for you. Please write us: info@bernd-richter-gmbh.com

Visit us in Düsseldorf on MEDICA 2008, 40th World Forum for Medicine from
19th to 22nd of November 2008 in Hall 11 booth F73 (Show Hall plan).

Do you have any questions? Please write us.

More complex products and complicated processes are becoming simpler and safer.

Not only for production but also for training purposes we use video support for some time now. Components and assembly techniques are displayed on a 20" flat screen.

We have company holidays between July 21th and August 1st 2008 (both inclusive).
We will be back on August 4th, 2008.
The entire staff wishes you sunny and recreative summer weeks.

Team spirit and coherence ist a very important aspect for modern companies. This is why we take active part in different events or organize them ourselves.

To participate in the Wipperfuerth City Kart Race from June 20 to June 22, 2008, for the first time the Bernd Richter company has set up a racing team.

From 32 drivers of the company, 12 drivers could qualify for the „Richter Team Racing“ during internal training races. Therewith the local savings bank „Kreissparkasse“ and „Richter Team Racing“ constitute the biggest teams of the event.

From the draft in CAD to the CNC manufacturing, we have updated all CAD/CAM workstations to SolidWorks 2008.

Your input data will be translated into the newest data format then processed so the tools needed for the manufacture of your product can be automatically machined.

We wish you a happy, healthy and successful new year.

We thank you for your visit to MEDICA / COMPAMED 2007. Any open questions? We are certainly available for you. Please write us: info@bernd-richter-gmbh.com

Pictures MEDICA / COMPAMED

This year we will be present not only on MEDICA (14. - 17. November) but also on COMPAMED (14. - 16. November) in Düsseldorf.

You can find us in Hall 11 / F73 (MEDICA) and Hall 8b / K03 (COMPAMED).

The plastic molding department was equipped with another custom Arburg vertical molding machine with 25t clamping force to respond to the increasing demand.

(Picture)

If you are interested in a modern working environment and the chance for development, please look at our new web section.

Job offers and how to apply can be found on our Job pages.

To not only preserve but further increase our flexibility and speed, we have expanded our tool shop with a FEHLMANN Picomax 54 Top CNC milling-drilling machine.

Valued Customers,

we hope you had a good start into the year 2007.
Our entire team is there to serve you. Contact us.

Valued Customer,

our company will be closed from December 22, 2006 until January 2, 2007 for Christmas Holidays. The executive board and the entire staff wish you a Happy New Year!

Valued Customer,

our company will be closed from December 22, 2006 until January 2, 2007 for Christmas Holidays. If you need a confirmation for an order within 2006, please place the order before December 15, 2006. The executive board and the entire staff wish you a Merry Christmas and a Happy New Year!

We thank you for your visit to Medica 2006. Any open questions? We are certainly available for you. Please write us: info@bernd-richter-gmbh.com

Only a few days until MEDICA!

Visit us from November 15 to 18 in Hall 11 Stand F73 on Medica 2006 in Düsseldorf (Show Hall Plan).
Do you have questions in advance? Please write us.

Since November 1st our new office address is:

Bernd Richter USA Inc.
400 Robert Street North, Suite 1850
Saint Paul MN 55101
USA

Phone and Fax numbers remain unchanged.

Visit us from November 15 to 18 in Hall 11 Stand F73 on Medica 2006 in Düsseldorf (Show Hall Plan).
Do you have questions in advance? Please write us.

To respond to the demand of increasing capacity with consistently high quality, we have complemented the plastics molding department with another fully-automatic ARBURG molding machine.

This machine can be set up with tools of max. 320 x 320 mm producing shot weights of max. 64 g.

We have company holidays between July 17th and July 28th (both inclusive).
We will be back on June 31st, 2006.
The entire staff wishes you sunny and recreative summer weeks.

In the course of extensions of the top level domains (TDLs) as of now you can also reach us under the following URLs: www.medizinkabel.eu and www.bernd-richter-gmbh.eu.

We would like to welcome you to our booth 2076 on "MD&M East" in New York, NY from June 6th to June 8th.

More information on the "MD&M East" trade show can be found here: MD&M East 2006

In this edition of the company news we would like to inform about our latest machine tool investment:
For CNC cavitiy sinking, an EDM center of the company Zimmer+Kreim has been purchased.
With its 50-fold electrode changer we are able to reduce throughput times for production and sample tools considerably.
(Image 1 | Image 2 | Image 3)

In this news edition we would like to present another investment in tooling and prototype manufacturing capabilities.
Our CNC turning center was upgraded with a new ultra-high precision lathe for prototypes and small production runs of highy precise workpieces.
(Image 1 | Image 2 | Image 3 | Image 4)

In this issue of our News we would like to inform you about our newest investment in the tool design and prototype manufacturing department. The highly precise swiss HSC CNC milling machine will allow us to address your tooling specific needs faster and more efficiently.
(Image 1 | Image 2)

We would like to welcome you to our booth 1676 on "MD&M West" in Anaheim, USA from January 30th to February 2nd.

More information on the "MD&M West" trade show can be found here: MD&M West 2006

We would like to welcome you to our booth 7D21 on "Arab Health" in Dubai from January 22 to 25th.

More information on the "Arab Health" trade show can be found here: http://www.arabhealthonline.com

Valued Customers,

we hope you had a good start into the year 2006.
Our entire team is there to serve you. Contact us.

BERND RICHTER GmbH
Hansestraße 4
D-51688 Wipperfürth
Germany

Telephone +49 (0) 22 67 / 88198-0
Telefax +49 (0) 22 67 / 88198-719
e-mail contact